Griffco Valve CC1000LS Calibration Cylinder, 1000 mL, Loose, Socket

Features:

• Capacity - 1000 mL
• Material - PVC
• Top end cap style - Loose Top
• Connections - Socket
• High Reliability / Low Cost
• High Contrast Graduation Markings
• Clear Easy-View Tube
• Robust Schedule 40 Pipe Construction
• Direct GPH Readout
• Sealed Top with Overflow Connection

Griffco calibration cylinders are installed in the suction line to the chemical metering pump. Two isolating valves, (not supplied) must be installed in the suction line as per the drawing below. The top of the cylinder should be vented back to the storage tank or to drain. Fill the cylinder to the top mark then close the valve from the chemical tank. Switch on the chemical feed pump and draw down the chemical in the cylinder for 30 seconds. Switch the pump off. The reading on the right side of the cylinder is a direct readout of USgph. Alternatively, observe the volume withdrawn on the mL scale.

Griffco calibration cylinders are designed to enhance the performance of chemical feed systems by providing a verification of the flow rate of the chemical feed pump. Robust construction of clear PVC with an easy to read graduation in mL and gph.

For more information, please see Data Sheet